Descripción
Techspray® 1720-G Zero Charge Floor Coating - 3.8L
ESD-SAFE FLOOR COATING FOR A HIGH GLOSS FLOOR FINISH
This product is a high gloss floor finish designed for use in electronic production areas, computer rooms and other static sensitive areas.
Contains a non-migratory, static dissipative polymer, which will maintain a constant surface resistivity of 106-108 ohms throughout the humidity spectrum.
FEATURES & BENEFITS
- Resistivity between 106-108
- High gloss polymer
- Slip resistant
- Effective in low humidity
- Zinc free
DIRECTIONS
With a new mop and clean pails, apply coating as follows:
- Apply thin coat to floor, i.e. ¾ way down on the ringer. Let dry to touch, approximately 45 – 60 minutes.
- Apply a second coat, approximately ½ way down on the ringer.
Note: Two coats only are recommended for conductive tile. - If a third coat is applied, wait 24-hour waiting period/dry time after previous coat.
If a third coat is applied, the floor space may be occupied once it is dry. After at least a 6-hour wait, buff the floor with a white pad to harden and polish the coating. Expect a coating yield of 1,200 ft2 for each gallon of coating per coat.
| Specifications | |
| Model | 1720-G |
| Physical State | Liquid |
| Odor | Polymer Smell |
| Appearance | Opaque, white liquid |
| Freezing Point | 32ºF (0ºC) |
| pH | 8 to 9 |
| Boiling Point | 200ºF (>100ºC) (760 mmHg) |
| Solubility in Water | Insoluble (cured product) |
| Density | 0.96 at 25ºC |
| Shelf life | 5 years unopened |
| Brand | Techspray |
|
Package Contents |
|
| Item | Quantity |
| 1720-G |
3.8 L |