Descripción
OTOVON® Polyimide Heat Resistant Kapton Tape
PRODUCT# RKT362
High temperature masking tape is ideal for masking printed circuit boards during wave solder or solder dip process, as well as for solder wave masking and electrical insulation.
The polyimide, pressure sensitive, adhesive tape with silicon resin, shows excellent dielectric insulation properties, high heat resistance and excellent solvent resistance. These properties result in a tape with remarkable dimensional stability and excellent electrical and physical properties over a wide range of temperatures.
Features
- High Electrical Strength
- Peel-off without leaving any adhesive residue
- Up to 260°C / 500°F temperature resistance
- Class H insulation
- Width: 2 ~ 500 mm custom slit
Applications
- Surface assembly, for protection of golden finger in wave soldering and re-flow soldering.
- For the adhesion and class H insulation of electronic switch, motor, transformer, relay, wires, coil, capacitor and lithium battery etc.
- Cover during powder coating, 3D printing, chemical process, soldering.
Construction - Single Side
Top Layer – Polyimide Film
Bottom Layer – Silicone Adhesive
Specifications |
|||
PRODUCT# |
RKT362 |
||
Appearance |
Amber |
||
Carrier |
Polyimide |
||
Adhesive |
Silicone |
||
Length |
33 m |
||
Carrier Thickness |
0.050 mm / 50 μm |
||
Total Thickness |
0.080 mm / 80 μm |
||
Tensile Strength |
185 N/cm |
||
Adhesion |
5.5 N/cm |
||
Elongation at Break |
50 % |
||
Heat Resistance |
260°C / 500°F |
||
Electrical Strength |
7000 Volts |
||
Anti-Static |
No |
||
Storage Condition |
20°C, 65% RH, Shady, Clean & Dry Place |
||
Warranty |
Limited* |
||
Size Chart |
|||
Product Code |
Width |
Quantity |
|
RKT362-03 |
03 mm |
Per Roll |
|
RKT362-06 |
06 mm |
Per Roll |
|
RKT362-08 |
08 mm |
Per Roll |
|
RKT362-10 |
10 mm |
Per Roll |
|
RKT362-12 |
12 mm |
Per Roll |
|
RKT362-15 |
15 mm |
Per Roll |
|
RKT362-20 |
20 mm |
Per Roll |
|
RKT362-24 |
24 mm |
Per Roll |
|
RKT362-30 |
30 mm |
Per Roll |
|
RKT362-36 |
36 mm |
Per Roll |
|
RKT362-40 |
40 mm |
Per Roll |
|
RKT362-48 |
48 mm |
Per Roll |
|
*Warranty: Under warranty product is supposed to be free from any manufacturing or material defects. If a product is proved to be defective, then the exclusive remedy, and seller’s sole obligation is limited up to replacement of the defective quantities of the product or refund
NOTE: We can also supply Kapton Tapes from any custom size width between 2 mm to 500 mm on a requirement basis.