Goot® 80W RX-802AS Temperature-Controlled Lead-Free Soldering Station
Tip is Not Included (RX-80HRT Series / RX-81HRT Series / XST-80HRT Series)
- 6-Seconds to Set Temperature
- The Ultimate Solution for Lead-Free Soldering
- Goot RX-802AS Soldering Station is an ultimate solution for lead-free soldering available in India.
- Despite its less cost, this soldering station offers high performance in its class.
- Accessories - Handpiece Grip Rubber.
- Functions – Tip-temperature Recovery Features.
- Reduced Grip Heat – Patented thermal-insulation grip permits comfortable and safe work.
- Thick Tip Coating For Lead-Free Soldering – All tips have extra-thick iron plating, to resist erosion by lead-free solder.
- Tip Replacement without Tools (PAT.) – Slide-change tip. Easy to replace a hot tip without any other tools.
- Fastest in Its Class – Reaches set temperature in just 6 seconds after turning power ON.
- Excellent Heat Recovery (PAT.) – There is almost no temperature fluctuation during continuous operation. Good for lead-free soldering.
|Voltage||110V,120V,130V,220V,230V,240V AC 50/60Hz|
|Power Consumption||80 W|
|Power Cord Length||1.2 m|
|Temperature Setting Range||50–450°C|
|Ripple Temperature||±5˚C (unloaded)|
|Insulation Resistance||Over 100 MΩ (500V DC)|
|Accessories||Soldering Iron Stand (ST-21 )|
|Weight||2 Kg Appx.|
|Country of Origin||Japan|
|Output Voltage||24 V AC|
|Dimensions||115(W) × 98(H) × 146(D) mm|
|Voltage / Consumption||24V AC / 72W|
|Ground Resistance||Less than 2 Ω|
|Leak Voltage||Less than 2 mV|
|Cord Length||1.2 m|
|Length||158 mm (with RX-80HRT-MB)|
|Weight||28 g (with RX-80HRT-MB)|
|Iron RX-72GAS||1 N|
|Stand ST-22||1 N|
|Tip RX-80HRT Series||No Included|
Equivalent to IPC/EIA J-STD-001C
|**The length does not include the cord bushing. The weight does not include the cord.|
* Warranty is valid from the date of invoice. It excludes all consumable parts as Heating Elements, Temperature Sensors, Soldering Tips, Cleaning Sponges, Cleaning Brass Wool and mechanically damaged parts.
Repair warranty only for controller unit applicable from the date of purchase. Forward-Reverse transportation cost from our office in Delhi, India will be paid by purchaser of the equipment. Warranty voids in case of liquid damage, physical damage and/or if warranty seal is voided off.