Goot TQ-95 Quick Heat Soldering Iron - 20W / 200W

Save 24%
GootSKU: 0000178

Sale price₹2,983.04 Regular price₹3,946.08

(Inclusive of GST) M.R.P.

  Save Extra with offers
Free Shipping: On Prepaid Cart Value of ₹1499/- and above.
Business Purchases: Get GST Invoice and Save up to 28%.

  • GST Tax Invoice - Available, Provide GST Number at Checkout to Get Tax Input
  • Sold By - Otovon Electronics Private Limited
  • Address - 42A, Upper Ground Floor Back Side, KH No. 40/15 Abchal Nagar, Nilothi Extension, Delhi, IN - 110041
  • E-mail -
  • Phone - 9315187923
  • WhatsApp - Click Here


Goot TQ-95 Soldering Iron | 20W / 200W

Two-Stage Low 20 W / High 200 W power heater. High power runs while trigger/quick button is pressed.

Quick-Heat Soldering Iron

Two Stage Heat-Switch System - 10 times Higher Power than Normal

Comfortable Soldering - High-Power Ceramic Heater

Ergonomic Grip - Prevents Fatigue

Quick-Heat Button - Controls Power

Specially Processed Long-Life Tip

Heat Resistant Cap for Quick Storage After Use

RoHS 2 Compliant

Made in Japan 

Model TQ-95
Voltage 220-240 V AC 50/60 Hz
Power Consumption Low 20 W / High 200 W
Heater Type Ceramic Heater
Insulation Resistance Over 100 MΩ (500 V DC)
Power Cord Length 1.5 m
Length 210 mm without Cord Bushing
Weight 65 g without Cord
Warranty NA
JAN 4975205030960
Brand Goot
Country of Origin Japan
Replacement Parts
Standard Tip TQ-77RT-B-L
Heater TQ-95H
Spacer TQ-77SS
Collar TQ-77NUT
Heater Barrel
Heat-Resistant Cap TQ-CAP
Recommended Stand ST-27
Applicable Replacement Tips
  • The iron will reach soldering temperature in 1 to 2 minutes after being plugged in.
  • Pressing the quick heat button increases the soldering temperature.
  • Use the quick heat button to increase the soldering temperature for heavy
    soldering (e.g., Large Terminals, Connectors).
  • Use at normal soldering temperature for precision soldering (e.g., PCB).
  • To prevent serious burns or fire, use an appropriate soldering iron stand.
  • Keep out of reach of children.
  • Plugging into an outlet other than the rated input voltage may result in overheating and fire.
  • To prevent electric shock, do not use the soldering iron in damp or wet locations or expose it to rain.
  • After use, the tip is still very hot. Allow it to cool down sufficiently before touching the tip or storing the iron. Failure to do so will result in serious burns or fire.
  • To protect against overheating, do not continuously press down on the quick heat button. On initial operation, press the button for 30 seconds. At other times, do not press the button for more than 10 seconds.
  • Use of the quick heat button reduces the electrical insulation factor. Be careful when soldering PCB or sensitive electronic components to protect against leak damage.
  • Do not plug in before removing the cap. The cap may be replaced on the soldering iron three minutes after having been unplugged. The cap holds heat. Use with caution.
  • Before replacing the heater or tip, unplug the soldering iron wait until it cools down.
  • When plugged in, do not touch any part of the iron other than the grip. Failure to do so will result in serious burns. Never leave the iron unattended while plugged in.
  • To avoid fire, never use the soldering iron around combustibles or in an explosive environment.
  • Never use the soldering iron if the power cord is damaged as this may result in fire or electric shock.
Package Contents
Item Quantity
1 N
Download Instruction Manual

Customer Reviews

Based on 1 review
Good solder

Good tool . Heating is fast . For smd purposes tip may be shaped flat . So then over all view it’s better than other soldering iron

You may also like

Recently viewed